DenLi company has exclusive intellectual property rights on horizontal vacuum sintering furnace (Patent number: ZL01234997.6). It is mainly used as atmosphere sintering, vacuum heat treatment and vacuum sintering of materials, such as stainless steel, cemented carbide, super alloy, heavy alloy, ceramic, magnetic alloy, carbide, boride, nitride, oxide and intermetallic compound.        Horizontal water cooling structure is adopted in this furnace, with front door or double doors. Heat element can be graphite, Mo or W depending on working temperature and customer' demand. Heat elements are distributed in several heating zone, in which independent temperature control system with PID adjustors is adopted. Furnace body can be moved out as a whole to facilitate maintenance. Gas filling device is adopted to fill protective gas or working gas with controllable gas volume of flow. Gas cooling system in furnace or out of furnace can be added to the furnace to speed up cooling of materials, leading to shorter working cycle and higher efficiency.

Main specifications and accessories Specification and types ZSJ-25×25×50 ZSJ-30×30×60 ZSJ-35×35×70 ZSJ-40×40×80 ZSJ-45×45×90 ZSJ-50×50×130 Rated loading weigh  (kg) 50 100 150 200 300 600 Rated temperature (℃) 1550 1550 1550 1550 1550 1550 Temperature uniformity (℃) ≤±5 ≤±5 ≤±5 ≤±5 ≤±5 ≤±5 Designed heating power (Kw) 60 75 90 120 165 240 Rated power supply voltage(V) 3 phase,   380V Rated heating voltage (V)                                          Transformer is provided according to design Maximum vacuum degree (Pa) (without loading at room temperature)    ≤2Pa Pressure increase rate (Pa/24h) ≤50 Dimension of working zone (mm) (W×H×L) 250×250×500 300×300×600 350×350×700 400×400×800 450×450×900 500×500×1300 Temperature control system outfits             Programmable temperature controller made by SHIMADEN Vacuum system outfits                               Rotary vane vacuum pump + Roots vacuum pump Heating element material Graphite or Mo or W          ●Rated loading is calculated by assuming that the packing density is 2 kilogram per liter.          ●Above-mentioned standard outfits are subject to change according to customers' demands.          ●Optional:          1.Rapid cooling system inside or outside the furnace;           2.PLC and touch screen control system;          3.Maxim vacuum can be as high as 10-3Pa if oil diffusion pump is added to the vacuum system;           4.MHeating elements and heat shield is designed and installed to ensure the sintering temperature of over 2000 ℃.           5.Sub-atmosphere constant pressure sintering can be realized to improve density and quality of products sintered.