 Horizontal Vacuum De-Wax and Sintering Furnaces parameter>>>> |
| |
 |
Horizontal vacuum de-wax or paraffin and sintering furnace is used for de-wax and sintering in vacuum or in certain gas for materials, such as stainless steel, cemented carbide, super alloy, heavy alloy, ceramic, magnetic alloy, carbide, boride, nitr
|
|
|
| Reduction furnace with fourteen tubes parameter>>>> |
| |
 |
This kind of reduction furnace is used for reduction and calcination of metal powder. It is especially suitable for reduction of W and Mo powder with moderate particle size. It adopts advanced boat pushing system. Main motion is controlled by PLC and
|
|
|
| Graphite tube carbonization furnace parameter>>>> |
| |
 |
Graphite Tube Carbonization Furnace is a continuous equipment for PM industry.It can be utilized for reduction and carbonization of cemented carbide and cemented carbide compound. It adopts graphite tube as heating element and it is covered by hydro
|
|
|
| Double tube four tube reduction furnaces parameter>>>> |
| |
 |
Double tube,four tube reduction furnaces are widely utilized to reduce tungsten oxides or Mo oxides in Hydrogen atmosphere at elevated temperatures. It adopts heat resistant stainless steel as muffle material. Mufflecross section is a rector square.
|
|
|
|
|
|
|
| Spray drying equipment parameter>>>> |
| |
 |
Spray drying equipment is used to dry and granulate ball milled cemented carbide suspension. Compared with Pellet mill and Riquett granulatingm, spray dried products possess distribution and fine flowability,leading to uniform weight,size and lower
|
|
|
| Mesh belt furnace parameter>>>> |
| |
 |
Mesh belt furnaces fabricated by DENLI are continuous resistance furnaces tailored to PM industry for the sintering of PM articles or reduction of metal powders. Belt furnaces consist of furnace body, belt conveying system and temperature control sys
|
|
|
| Steel belt conveyor furnace parameter>>>> |
| |
 |
Steel conveyor furnaces are tailored to PM industry for the reduction of Fe, Cu, Co, Mo and W metal powders from respective oxides, also for the calcination and final reduction of Cobalt oxilate, APT and other metal salines. The equipment has a large
|
|
|
| Push rod type reduction furnace parameter>>>> |
| |
 |
Push type reduction furnace is a continuous equipment tailored to PM industry for the reduction and annealing of metal powder. It consists of furnace body, boat pushing system and temperature control system. Furnace body is divided into several indep
|
|
|
|
|
| Mesh belt conveyor blackening furnace parameter>>>> |
| |
 |
It is a continuous operation furnace for PM industry, mainly utilized forvapor heat treatment of PM components. It includes a furnace body, a belt transmission system, temperature control system and a vapor boiler. Furnace body includes load sector,
|
|
|
| Vacuum oil soak machine parameter>>>> |
| |
 |
Vacuum Oil Soak Machine is mainly utilized to soak oil for powdermetallurgy parts, especially metal oil-retaining bearing parts. It includesvacuum system, oil system and electrical control system. There are two kinds of oil soak soak machine automati
|
|
|
| Well type blackening furnace parameter>>>> |
| |
 |
It is a kind of batch furnace .It can do surface treatment, especially surface black oxide coating, for PM iron based components and machined parts, in a van by heated up vapor .It includes furnace chamber, jacking device, ventilated, vapor boiler an
|
|
|
| Horizontal vacuum sintering furnace parameter>>>> |
| |
 |
DenLi company has exclusive intellectual property rights on horizontal vacuum sintering furnace (Patent number: ZL01234997.6). It is mainly used as atmosphere sintering, vacuum heat treatment and vacuum sintering of materials, such as stainless steel
|
|
|
| Horizontal vacuum de-wax furnace parameter>>>> |
| |
 |
Horizontal vacuum de-wax furnace is used for de-wax or pre-sintering process in vacuum or in certain gas for materials such as stainless steel, cemented carbide, super alloy, heavy alloy, ceramic, magnetic alloy, carbide, boride, nitride, oxide and i
|
|
|
|
|
| Single chamber high pressure gas quenching furnace parameter>>>> |
| |
 |
This series of Single chamber high pressure gas quenching furnace consists of main furnace, vacuum system, water cooling system, inflation system, gas cooling system, electric control system and furnace outer material car etc. It is used for high pre
|
|
|
| Continuous belt furnace for LiFePO4 parameter>>>> |
| |
 |
Continuous belt furnace for LiFePO4 is mainlyused for calcination sintering, and reduction ofmetal powders and salt material. The furnace doesnot need boatpushing system, feeding material isautomatically sprayed onto the belt. The equipmenthas a larg
|
|
|
|
|
| Automatic air calcination / sinter kiln parameter>>>> |
| |
 |
The automatic air calcination and sinterkiln is mainly used for continuous sinter of high quality battery positive pole material like“Ni,Co,Mn three kinds material”and “nature changed lithium manganate”lithium ion etc.This kiln consists of kiln body,
|
|
|
| High temperature rotary calciner parameter>>>> |
| |
 |
High temperature rotary calciner is an ideal equipment specialized in production of battery material and Co3O4.The furnace tube is made of special refractory steel with working temperature up to 950~980℃，It has inner special guide plate structure,fee
|
|
|
| HIP sintering furnace parameter>>>> |
| |
 |
This HIP sintering furnace is the key equipment for producing high property cemented carbide products which have nice organization structure, strengthness and density.The equipment can achieve continuous different pressure de-wax vacuum sinter and pr
|
|
|
|
|
| Rotary calciner furnaces parameter>>>> |
| |
 |
Rotary calciners are designed for continuous processing such as reduction and calcinations of metal powders under controlled atmosphere at temperature up to 1050℃。 Rotary calciner is a kind of continuous equipment, in which feeding and dumping is aut
|
|
|
| Vertical vacuum mixer parameter>>>> |
| |
 |
Vertical vacuum mixer will replace Z type vacuum mixer when utilized for mixing and drying of cemented carbide powder with rubber or paraffin as binder. It has such characteristies as more uniform mixture of rubber or paraffin, rapid drying, higher
|
|
|
| Inclinable ball milling machine parameter>>>> |
| |
 |
Inclinable ball milling machine is used for ball milling of cemented carbide powder mixture, other metals and nonmetal powders. It Utilizes or Japanese SUS321 stainless steel as cylinder material. It adopts SEW or Flender Reduction gear to avoid oil
|
|
|
|
|
